In architecture, pipes are used in a variety of ways. Plate common points 10mm, 20mm, 25mcm, 30mm thick, 9-10m long.Common pipe diameter from 6-108mm, thickness of 9, 15, 20, 25, 30mm. The specific thickness can be negotiated with the manufacturer according to their own needs, and then processed after confirmation.
The thickness of the rubber and plastic insulation material is determined by the following factors: ambient temperature, relative humidity, medium temperature and the size of the pipe that needs to be used for rubber and plastic insulation.
The air duct has a long extension range, which is easy to cause heat loss in the process of water or gas transmission. In order to maintain the stability of heat and temperature, it is necessary to heat the air duct,rubber and plastic insulation materialis the only choice. Rubber thermal insulation has excellent thermal insulation effect on the pipeline, the material is soft and winding, easy to install, and good thermal insulation effect. During installation, it is recommended to use special thermal insulation glue. Other glue is not recommended. The special glue is customized according to the performance of rubber and plastic thermal insulation board, and the effect is much better. When installing rubber and plastic insulation board on the air pipe, cut it according to the size of the air pipe, try to fit the air pipe pipe, corner fitting, leaving no gap, the installation is not in place, it will affect the insulation effect.
So what are the thickness choices of air duct rubber and plastic?
Take uetersen standard specifications for example: rubber and plastic sheet width is 1.2m conventional width. The standard thickness is as follows: 6mm, 10mm, 13mm, 15mm, 20mm, 25mm, 32mm, the above specifications are common specifications, special specifications can be made according to user requirements.
Rubber is applicable to commercial, industrial, residential and public buildings in various piping and equipment insulation protection, in order to prevent condensation and reduce energy consumption, especially for pipe and duct, refrigeration equipment, central air conditioning system of hot water piping and process piping insulation engineering, are widely used in sports equipment protective cover, gaskets and rescue diving suit.1